Archives

ZCGZJII-H Flame Arrester For Pipe Fittings Joint

Leave a comment

Producdt Description

In Line Flame Arrester is mainly composed of shell and fire element. There are two kinds of commonly used metal mesh filter element and corrugated filter element. The metal mesh filter element is composed of stainless steel or copper mesh with a diameter of 0.23-0.315 mm and overlapping layers. In Line Flame Arrester in China usually use 16-22 mesh metal mesh with 4-12 layers.

The corrugated filter element is supported by stainless steel, copper-nickel alloy, aluminium or aluminium alloy. Corrugated flame retardant can prevent the fierce flame of deflagration, and can withstand the corresponding mechanical and thermal effects, flow resistance is small, easy to clean and replace.

Installation:

  1. Remove all flange cover and discard all packaging materials.
  2. Check the seat, the matching flange gasket on the seat surface. It must be clean, flat, scratch-free, corrosion-resistant, tool traces.
  3. Check the gasket to ensure that the material is suitable forapplication.
  4. Lubricate all studs and nuts with proper thread lubricant. If the fastener is a high temperature stainless steel material, a back-grabbing compound, such as molybdenum disulfide, is used.
  5. Inside gasket of bolt ring.
  6. Installing flange of Inline flame arrester shell to butt with flange of pipeline, attention should be paid to the position of lifting handle and top nut of In line flame arrester element to facilitate the removal of In line flame arrester elements in the future.

Note:

Under normal circumstances, (fire) breathing valve operating pressure to B shall prevail;

Applicable materials: gasoline, kerosene, diesel, aromatics, sulfur, air and other petrochemical materials;

Environment temperature: -40 °C -+60 °C;

Shell material: HT, AL, A3, 18-8, 304, 304L, 316, 316L.

Flange standards: HG20592-97 PN1.0 (also can be produced according to user specified criteria)



    ZCBV-I Zhenchao Zcbv-I Breathing Valve

    Leave a comment

    Producdt Description

    ZCPE-pilot operated  breather valve with flame arrester is a bit different with breather valve ,first let the seat leakage closer to set point ,second  full flow without overpresure ,to  maintain the tank pressure balance, reduce safety energy-saving products medium volatile, but also the use of principles of vapor heat transfer, protect the respiratory valve parts is not easy to freeze, the breathing valve to ensure the normal work, equipped with fire retardant explosion-proof function.

    Fire breathing valve produced by our company has simplified structure, ventilation volume, less leakage, corrosion resistance, insulationetc.. The valve adopts polytetrafluoroethylene material, has the advantages of low temperature resistant, anti frost. The electrostaticprotection device is provided with a respiratory valve, the valve and the tank to keep the same potential moment.

    Operating pressure:

    Type A: +355pa(+36mmH2O) -295pa(-30mmH2O)
    Type B: +980pa(+100mmH2O)-295pa(-30mmH2O)
    Type C:  +1950pa(+200mmH2O) -295pa(-30mmH2O)
    Type D: according to user requirement (special pressure rating)
    Material： WCB SS304 SS304L SS316 SS316L
    Flange Standard： HG/T20592-2009   ANSI B16.5

    HG/T 20615-2009(Class series)

    HG/T20592-2009 (PN series)

    ANSI B16.5

    AMSE B16.5

    Note:

    Under normal circumstances, (fire) breathing valve operating pressure to B shall prevail;

    Applicable materials: gasoline, kerosene, diesel, aromatics, sulfur, air and other petrochemical materials;

    Environment temperature: -40 °C -+60 °C;

    Shell material: HT, AL, A3, 18-8, 304, 304L, 316, 316L.

    Flange standards: HG20592-97 PN1.0 (also can be produced according to user specified criteria)



      ZCBV-IV Breathing Valve With Piping Connection

      Leave a comment

      Producdt Description

      ZCPE-pilot operated  breather valve with flame arrester is a bit different with breather valve ,first let the seat leakage closer to set point ,second  full flow without overpresure ,to  maintain the tank pressure balance, reduce safety energy-saving products medium volatile, but also the use of principles of vapor heat transfer, protect the respiratory valve parts is not easy to freeze, the breathing valve to ensure the normal work, equipped with fire retardant explosion-proof function.

      Fire breathing valve produced by our company has simplified structure, ventilation volume, less leakage, corrosion resistance, insulationetc.. The valve adopts polytetrafluoroethylene material, has the advantages of low temperature resistant, anti frost. The electrostaticprotection device is provided with a respiratory valve, the valve and the tank to keep the same potential moment.

      Operating pressure:

      Type A: +355pa(+36mmH2O) -295pa(-30mmH2O)
      Type B: +980pa(+100mmH2O)-295pa(-30mmH2O)
      Type C:  +1950pa(+200mmH2O) -295pa(-30mmH2O)
      Type D: according to user requirement (special pressure rating)
      Material： WCB SS304 SS304L SS316 SS316L
      Flange Standard： HG/T20592-2009   ANSI B16.5

      HG/T 20615-2009(Class series)

      HG/T20592-2009 (PN series)

      ANSI B16.5

      AMSE B16.5

      Note:

      Under normal circumstances, (fire) breathing valve operating pressure to B shall prevail;

      Applicable materials: gasoline, kerosene, diesel, aromatics, sulfur, air and other petrochemical materials;

      Environment temperature: -40 °C -+60 °C;

      Shell material: HT, AL, A3, 18-8, 304, 304L, 316, 316L.

      Flange standards: HG20592-97 PN1.0 (also can be produced according to user specified criteria)



        ZCBV-IVZ Breather Valve With Flame Arrester With Piping Connection

        Leave a comment

        Producdt Description

        ZCPE-pilot operated  breather valve with flame arrester is a bit different with breather valve ,first let the seat leakage closer to set point ,second  full flow without overpresure ,to  maintain the tank pressure balance, reduce safety energy-saving products medium volatile, but also the use of principles of vapor heat transfer, protect the respiratory valve parts is not easy to freeze, the breathing valve to ensure the normal work, equipped with fire retardant explosion-proof function.

        Fire breathing valve produced by our company has simplified structure, ventilation volume, less leakage, corrosion resistance, insulationetc.. The valve adopts polytetrafluoroethylene material, has the advantages of low temperature resistant, anti frost. The electrostaticprotection device is provided with a respiratory valve, the valve and the tank to keep the same potential moment.

        Operating pressure:

        Type A: +355pa(+36mmH2O) -295pa(-30mmH2O)
        Type B: +980pa(+100mmH2O)-295pa(-30mmH2O)
        Type C:  +1950pa(+200mmH2O) -295pa(-30mmH2O)
        Type D: according to user requirement (special pressure rating)
        Material： WCB SS304 SS304L SS316 SS316L
        Flange Standard： HG/T20592-2009   ANSI B16.5

        HG/T 20615-2009(Class series)

        HG/T20592-2009 (PN series)

        ANSI B16.5

        AMSE B16.5

        Note:

        Under normal circumstances, (fire) breathing valve operating pressure to B shall prevail;

        Applicable materials: gasoline, kerosene, diesel, aromatics, sulfur, air and other petrochemical materials;

        Environment temperature: -40 °C -+60 °C;

        Shell material: HT, AL, A3, 18-8, 304, 304L, 316, 316L.

        Flange standards: HG20592-97 PN1.0 (also can be produced according to user specified criteria)



          ZCBV-IZ Pvrv With Flame Arrester

          Leave a comment

          Producdt Description

          ZCPE-pilot operated  breather valve with flame arrester is a bit different with breather valve ,first let the seat leakage closer to set point ,second  full flow without overpresure ,to  maintain the tank pressure balance, reduce safety energy-saving products medium volatile, but also the use of principles of vapor heat transfer, protect the respiratory valve parts is not easy to freeze, the breathing valve to ensure the normal work, equipped with fire retardant explosion-proof function.

          Fire breathing valve produced by our company has simplified structure, ventilation volume, less leakage, corrosion resistance, insulationetc.. The valve adopts polytetrafluoroethylene material, has the advantages of low temperature resistant, anti frost. The electrostaticprotection device is provided with a respiratory valve, the valve and the tank to keep the same potential moment.

          Operating pressure:

          Type A: +355pa(+36mmH2O) -295pa(-30mmH2O)
          Type B: +980pa(+100mmH2O)-295pa(-30mmH2O)
          Type C:  +1950pa(+200mmH2O) -295pa(-30mmH2O)
          Type D: according to user requirement (special pressure rating)
          Material： WCB SS304 SS304L SS316 SS316L
          Flange Standard： HG/T20592-2009   ANSI B16.5

          HG/T 20615-2009(Class series)

          HG/T20592-2009 (PN series)

          ANSI B16.5

          AMSE B16.5

          Note:

          Under normal circumstances, (fire) breathing valve operating pressure to B shall prevail;

          Applicable materials: gasoline, kerosene, diesel, aromatics, sulfur, air and other petrochemical materials;

          Environment temperature: -40 °C -+60 °C;

          Shell material: HT, AL, A3, 18-8, 304, 304L, 316, 316L.

          Flange standards: HG20592-97 PN1.0 (also can be produced according to user specified criteria)



            ZCHX-VZ Prv With Flame Arrester

            Leave a comment

            Producdt Description

            ZCPE-pilot operated  breather valve with flame arrester is a bit different with breather valve ,first let the seat leakage closer to set point ,second  full flow without overpresure ,to  maintain the tank pressure balance, reduce safety energy-saving products medium volatile, but also the use of principles of vapor heat transfer, protect the respiratory valve parts is not easy to freeze, the breathing valve to ensure the normal work, equipped with fire retardant explosion-proof function.

            Fire breathing valve produced by our company has simplified structure, ventilation volume, less leakage, corrosion resistance, insulationetc.. The valve adopts polytetrafluoroethylene material, has the advantages of low temperature resistant, anti frost. The electrostaticprotection device is provided with a respiratory valve, the valve and the tank to keep the same potential moment.

            Operating pressure:

            Type A: +355pa(+36mmH2O) -295pa(-30mmH2O)
            Type B: +980pa(+100mmH2O)-295pa(-30mmH2O)
            Type C:  +1950pa(+200mmH2O) -295pa(-30mmH2O)
            Type D: according to user requirement (special pressure rating)
            Material： WCB SS304 SS304L SS316 SS316L
            Flange Standard： HG/T20592-2009   ANSI B16.5

            HG/T 20615-2009(Class series)

            HG/T20592-2009 (PN series)

            ANSI B16.5

            AMSE B16.5

            Note:

            Under normal circumstances, (fire) breathing valve operating pressure to B shall prevail;

            Applicable materials: gasoline, kerosene, diesel, aromatics, sulfur, air and other petrochemical materials;

            Environment temperature: -40 °C -+60 °C;

            Shell material: HT, AL, A3, 18-8, 304, 304L, 316, 316L.

            Flange standards: HG20592-97 PN1.0 (also can be produced according to user specified criteria)